Forney 299 Easy Weld 125 Fluxcore Welder
You'll find in this Forney Easy Weld 299 review 17 insider reasons.
Reasons why you should start your welding with this flux core welder.
And 4 reasons why you might want to pass the Forney 299 by.
*Disclosure: This document contains affiliate links. And at no extra cost to you this site earns a commission through these links should you decide to buy.
You should note:
The Forney Easy Weld 29901 is no long made. Your replacement product is the Forney Easy Weld 261 140 FC-i.
You'll find end of stock supplies or refurbished units of the Forney Easy Weld 29901 on Amazon.
Or if you're thinking of buying a second user unit, read on to find out all about it.
Forney Easy Weld 29901 125FC
Easy to use and durable, the Forney Easy Weld 29901 125FC is a gas less flux core wire welder.
With a maximum welding output of 125 Amp, you'll find this welder runs on normal 120 volt household power.
Perfect for when you are new to welding and need a flux core welder for your home workshop or garage.
And at just a shade under 33 lbs. it's light enough to take and use where you need it most.
Forney Easy Weld 299 Review
Pros Of The Forney Easy Weld 29901
Cons Of The Forney Easy Weld 29901
Overall Verdict On The Forney Easy Weld 29901
This is the welder you ought to get when you want the benefits of flux core gas less MIG welding. And you need a quality machine.
Flux core wire welding is the easiest welding process for beginners and the Easy Weld 299 does just that.
There is no compressed gas to choose, think about, transport or store.
This Easy Weld 29901 is easy for you to use and it's reliable. Your ground clamp and torch head comes ready assembled. This makes getting started even easier.
It'll not take long with this Forney 29901 125FC MIG Welder for you to get past the beginner stage of MIG welding.
When you're an experienced welder. And you want a flux core only machine from a traditional US manufacturer. This is the flux core welder of choice.
The Easy Weld 29901 welds using the flux core welding process. If you're not sure exactly what that is. Or would simply like to know more, you'll find some articles on the site;
"What is Flux Core Welding for Beginners and Everyone Else" and "What is Flux Core Welding Used for? Learn 12 Best Uses"
You can click on the links and take a look.
17 Reasons To Start Welding With The Forney 125 MIG Welder
Here are your reasons to start welding with a Forney 125 flux core welder.
Reason 1: Jobs You Can Use The Forney 125fc For
You'll find your Forney 29901 flux core wire welder aimed at those light to medium welding DIY jobs. It's ideal to use for welding mild steel around the home, yard and ranch. Have some light car or truck repairs to do?
Then use your Forney 299. Just check the metal gauge is not too thin or too thick.
If artistic welding of low carbon steel is your thing, then you're good to go.
Reason 2: Forney Easy Weld 125FC Welding Amp Output
You've a welding output of 65 Amp to 80 Amp. You'll find it's reasonable for an entry level flux core welder.
Reason 3: Two Voltage Settings On The Forney 125fc Welder
You've two settings for your Amp output voltage using a rocker switch on the front.
The single switch flips between the sheet metal setting and the thin plate setting.
The thin plate setting is your higher setting. Sheet metal is your lower setting.
This makes this flux core arc welder super easy to use.
You fine tune of your Amp output settings by adjusting the speed the flux core wire feeds out to the torch.
The down side is this makes the Forney 299 not as flexible as some flux core welders in its class. Some have more switches or dials to adjust the output Amp settings with.
If you're a more experienced welder you might find this restricting. But here you've a flux core welder made for light to medium welding tasks. And to be easy to use. Having the one switch for the Amp output setting is as easy as it gets.
Reason 4: What Do Users Think Of The Forney 29901 125FC
You'll find most are pretty thrilled with their buy.
Here's a link so that you can see for yourself what the users on Amazon think of the Forney Easy Weld 125FC.
View the Forney 29901 Reviews on Amazon (Commissions Earned)
You can scroll down to the end of the sales page to check out the reviews.
Reason 5: The Forney 125 MIG Welder Mild Steel Min Max Metal Gauges
Your Forney Easy Weld welds from 24 gauge up to quarter of an inch thick mild steel.
Though you'll need some skill and multiple welding passes to weld 1/4 inch thick steel.
You'll need to prepare your joint well and bevel.
Something a beginner welder could struggle with.
It's more realistic to expect to weld 3/16 of an inch thick max if you're starting your welding journey.
Reason 6: Forney Easy Weld 125 FC Duty Cycle
The duty cycle of your Forney wire feed welder is 20% at 80 Amps.
This means that you can weld for two minutes straight in a single 10 minute session. Then you must rest the welder for eight minutes to cool down. This is so that you don't overheat your welder.
This duty cycle is pretty solid. When you compare to some of the more entry level flux core welders that have duty cycles of 10%. Meaning you can only weld with them for 1 minute straight.
Reason 7: The Forney Easy Weld 29901 125 FC MIG Welder Start Up Kit
You can order the Forney 29901 125 FC MIG welder on its own or as bundled as part of a start up kit.
That way you get the Forney Easy Weld 299 125FC flux Core welder. Plus some things you'll need if you've never welded before.
You get:
- A Premier Series TIM Camo ADF Helmet.
- Black Welding Gloves,
- Split back premium leather driver gloves,
- a grinding disc wheel
- a wire scratch brush.
And the great thing is that all these bundled accessories are Forney products too.
When you're a beginner and without equipment. You can help yourself get a quick start with this beginner's package.
Reason 8: Forney 299 Easy Weld Internal Thermal Protection
The Forney Easy Weld 299 comes with internal Thermal Protection. This is a sensor that shuts off your welding when your flux core welder starts to overheat. This protects your Forney 29901 welder from damage.
The thermal protector will automatically reset when your welder is cool enough.
Beware though – the thermal protector may reset and you think you're ready to go and weld.
But Forney states quite clearly that you've to wait at least ten minutes. Before start to weld again.
Otherwise you risk "reducing the weld performance". And could experience "less than the specified duty cycle". – You have been warned.
Reason 9: Is The Forney 29901 125FC MIG Welder A 120 Volt Welder?
Yes. The Easy Weld uses 120V normal household power and can generate up to 125 Amps. Plug it into a normal 3 pin socket fused to 20 Amps and you're set.
Though you should make sure your Forney 299 is the only thing pulling power from that circuit. To get good welding output your Forney 299 needs all the power on the circuit. Otherwise you'll risk a welding arc that stutters and starts.
Reason 10: What Size And Type Of Welding Wires Can The Forney Easy Weld Use?
Flux-core wire only. The Forney 299 125FC Flux Core Welder is designed to use 0.030 inch diameter welding wire.
But it's possible for you to use 0.035 inch flux core wire instead. To do that you'll need to get 0.035 contact tips. As there are none in the box.
The wire speed rate is variable, and you can adjust it with a dial that goes from one to ten.
Reason 11: The Forney 299 Welder Can Hold 10 lb. Spools
Your Forney 29901 125FC can take either 2 lb. spools or 10 lb. spools (4 inch or 8 inch spools).
Which means you can take cost/convenience advantage of using the larger spools. You'll find that few flux core welders in its class offer this feature. Most of the others take the smaller spool size.
Reason 12: Forney 29901 Welding Parameters
There's a quick reference welding chart on the inside of the welder's cabinet.
It shows you the thickness of steel you're welding. The right wire feed speed to use and your power setting. Either sheet metal or thin plate.
This makes it super easy for you as a beginner. Or when you're new to using your Forney 29901 flux core welder. You get your starting settings and you can begin your welding without needing to refer to the manual.
Reason 13: The Forney 299 125FC Flux Core Welder Manual
The Forney 299 125FC Flux Core Welder Manual is pretty thorough. And talks you through setting up and using this welder.
Be ready to test and find the right welding settings for the job you want to do. Here is a link so that you can take a look at the manual ahead of deciding whether you'll buy this arc welder.
Owners Manual PDF Credit: Forney Industries
Reason 14: What's In The Box?
When delivered you get the Forney Easy Weld 125 Flux Core Welder
- A 2 lb. sample reel of 0.030 inch Forney flux core wire which is great quality.
- A quality chipping hammer and brush that's better than the ones found in other entry level flux core welders.
- 2 of 0.030 inch contact tips
- 2 Torch Wrap Ears
- 2 screws to affix the Torch Wrap Ears to the carry handle
- Welding gun cable (about six feet in length)
- A ground clamp cable (about six feet in length)
The Torch Wrap Ears are a nice touch. You screw them onto the handle on the top of the Forney 299 welder unit. Then you can use them to wrap your cables around when you carry the Forney 299. It makes carrying everything easier.
Reason 15: Is The Forney 125FC Portable?
It's certainly not bulky and is easily carried to your welding site.
Over all the welder measures 24.6 inches long by 12.6 inches wide by 18.5 inches high.
The weight is 32.6 pounds.
So it's definitely in the portable class of welders.
Reason 16: The Manufacturer Of The Forney 29901 Welders?
Forney a well-known brand in the welding industry.
Forney Industries started in 1932. And has manufactured high-quality tools and welding equipment for the last 80 plus years.
They're based in Fort Collins, Colorado.
Forney design their arc welders. With the Forney Easy Weld welders manufactured in Italy, these welders are American design – Italian manufacture.
The Forney Easy Weld 29901 125FC welder was first released onto the market in 2015.
Reason 17: Warranty
There was a 6-month warranty to cover defect in manufacturing and workmanship,. There is a 90 day cover on the MIG welder gun and electrode holder.
This article wouldn't be complete without a look at the other side of the coin.
4 Reasons Not to Buy The Forney Wire Feed Welder
Reason Not To 1: The Forney Easy Weld 125FC 29901 Is No Longer Made By Forney
For a while you can pickup the last few stocks. Or a refurbished unit. And of course you can pick one up second hand on Craigslist.
It's a real pity as this is a great flux core welder.
The good news is the Forney 299 is replaced by the Forney 261 140 FC-i.
It's more compact, more powerful and a great little welder. You can check it out by visiting this link to an article on the site here. Forney Easy Weld 261 140 FC-i.
Reason Not To 2: The Forney Easy Weld 125FC Can't Weld Aluminum
The Forney 299 welder does not weld Aluminum. It's a flux core only welder and there's no flux core wire available to weld Aluminum.
You'll discover an article that goes into all the detail. It outlines why you'll find there's no such thing as flux core Aluminum wire. You can check the article out here.
Also you can double check with Forney.
https://www.askforney.com/faqs/all-faqs/
Use the link above to see the Forney Industries FAQ page. Type 125 in the search bar to narrow down the list of questions to the ones for the Forney 29901 125FC.
Reason Not To 3: The Forney 29901 Can't Weld Stainless Steel
You may have read that your Forney 299 125FC flux core welder will weld stainless steel.
Generally welding stainless steel is done with a MIG welder. Because you use separate shielding gas and stainless steel solid welding wire.
Though it's possible to buy flux core stainless steel wire.
You can take a look at a document on the site where You'll find research on Stainless Steel Flux Core welding wires. Here.
You'll need a welder with enough Amp output. And one that can change its polarity. Something you can't do with your Forney 125FC welder.
And Forney expressly states it's not possible with this welder.
https://www.askforney.com/faqs/all-faqs/
You can use the link above to see the Forney Industries FAQ page. Type 125 in the search bar to narrow down the list of questions to the ones for the Forney 29901 125FC.
You want to weld stainless steel?
You'll need a MIG welder capable.
One that has enough power and can change polarity.
Why not check out this Lincoln 140 review post. Or this Everlast 140 review post for two welders capable of welding stainless steel.
Reason Not To 4: The Forney 299 125FC Can't Use Shielding Gas
The Forney 29901 is a flux core wire welder only. It's made for welding mild steel with flux core welding wire.
And Forney themselves confirm this.
https://www.askforney.com/faqs/all-faqs/
Use the link above to see the Forney Industries FAQ page. Type 125 in the search bar to narrow down the list of questions to the ones for the Forney Easy Weld 125FC.
Last Words On The Forney Easy Weld 29901
And there you have it. 17 reasons to start welding with the Forney Easy Weld 125 flux core welder – along with 4 reasons why not!
Related Articles
Best Flux Core Welder Under 200 Dollars, What's Best To Buy
Best MIG Welder For Home Use 120v? Want an Amazing Welder?
Forney 261 Welder Review, Got an Urge to Buy One?
Source: https://welditmyself.com/forney-easy-weld-29901/
0 Response to "Forney 299 Easy Weld 125 Fluxcore Welder"
Post a Comment